- Wurth USA
Wurth's Stabilant 22A is not your average contact cleaner

Wurth USA's Stabilant 22A is an electrically active material which through a synergistic combination of effects, enhances conductivity within a contact without causing leakage between adjacent contacts. Thus, large quantities of the material do not have to be "hosed" on, as is the case with cleaners. Now, that was the complicated technical term, but basically it is an electrical contact enhancer, that requires very little of the liquid to be effective. This non-toxic, non-flammable product cuts down on the costly replacement of sensors, switches and motors. Stabilant 22A has been recommended by many OE manufacturers, such as BMW, for effective repair of electrical issues.
AREAS OF STABILANT 22A IN USE:
STABILANT 22A ELECTRICAL CONTACT ENHANCER 15ML Art. No.: 0893622
2 fl. oz. bottle
Electrical contact enhancer
Leaves a thin polymer filmthat is conductive between mating surfaces, but is non-conductive between adjacent pins
BMW warranty, bulletin # SI 610500
When applied to contacts, it provides the connection reliability of a soldered joint without bonding the contacting surfaces together
Areas of Use:
Electric ignition system
Instrument clusters
Blade fuses
Bulbs
Heater and AC controls
Car stereos and speaker connections
Sensor connectors
Electric rear-view mirrors
Solenoid door and trunk locks and power windows
Horn circuits
Tail lights, parking lights and headlights
Trailer connections
Door activated switches
Battery terminals and starter lugs and terminals
Voltage regulators, alternators and generators
Diagnostic equipment
Get yours at Wurth USA Shop.